Panasonic UF-9000 Service Handbook page 70

No.
91 Original Lead ADF
92 Original Trail ADF
93-98 Not Used
99 F5/F6 Initialization
4.1.6. F7 Mode: Electronic Counter
Set the machine to Service Mode and press "7" key on the Keypad.
↓
Press the "START" key.
↓
Enter the desired code number or press "V", "/\" arrow keys.
↓
Press the "SET" key.
↓
Enter the desired function code number and press "SET" key.
↓
When the "CLEAR" key is pressed, the selected code input will not be accepted.
↓
Press "STOP" key, then press "FUNCTION" and "CLEAR" keys simultaneously to exit the service mode.
↓
Reboot the machine after setting the parameter(s) to activate the setting(s).
No.
01 Key Operator ID Code
02 Total Count
03 PM Count
04 Scanner PM Count
05 Not Used
06 OPC Drum Count
07 Process Unit Count
08 ADF PM Count
09-10 Not Used
11 Sheet Bypass Count
12 1st Paper Tray Count
13 2nd Paper Tray Count
14-15 Not Used
16 2-sided Count
17 ADF Count
18 ADF Read Count
Ver. 2.0
Item
Adjustment of original detection timing.
Adjustment of trail edge detection timing.
Initialize F5/F6 parameter settings.
Item
F6 Mode
Remarks
F7 Mode
Key Operator's identification code for access to the
counter mode.
Total count for all copies / prints.
Preventive Maintenance count.
PM count for scanner readings.
PM count of recording paper fed through the OPC
Drum.
PM count of recording paper fed through the
Process Unit.
PM count of originals fed through the ADF.
Total count of paper fed from the sheet bypass.
Total count of paper fed from the 1st paper tray.
Total count of paper fed from the 2nd paper tray.
Total count of 2-sided Print.
Total count of originals fed through the ADF.
Total count of originals scanned through the ADF.
70
UF-9000
DP-180/190
Setting
Range
-99 - +99
0.3mm
-90 - +127
0.3mm
Remarks
JUN 2004