26
Installation
System settings
Properties
3
•
System Name: Enter the system name by using alphabetic letter,
numeric digit and symbols up to 21 characters. The number of
maximum characters is depends on the language.
•
Language: Select a language for the setup menu and
information display.
•
Button Beep: Marks up to activate the button beep. The button
beep is activated when using the buttons.
•
Resolution: Sets the output resolution of the video signal.
•
Configuration Import: Import the system configuration data
from the USB memory stick.
•
Configuration Export: Export the configuration data from this
system to the USB memory stick.
•
Factory Default: You can reset the system to its original factory
settings. Some options cannot be reset (date, time, daylight
saving, time zone and user password settings).
TCP/IP v4
•
Interface: Select a LAN port you want to use (Ethernet 0 or
Ethernet 1).
•
DHCP: Select this option when a DHCP server is installed on the
network to allow IP address assignment. With this setting, the IP
address is assigned automatically.
•
IP Address: Enter the IP address.
•
Subnet Mask: Enter the subnet mask address.
•
Gateway: Enter the gateway address.
•
Primary DNS: Enter the Primary domain name server that
translates the hostnames into IP address.
•
Secondary DNS : Enter the Secondary DNS server address that
backups the Primary DNS.
TCP/IP v6
•
Interface: Select a LAN port you want to use (Ethernet 0 or
Ethernet 1).
•
Auto: Select this option to assign the IP address automatically.
•
IP Address: Enter the IP address.
•
Subnet Prefix Length: Enter the Subnet Prefix length.
An IPv6 prefix indicates the portion of the address used for
routing or identifying an address range.
•
Gateway: Enter the gateway address.
•
Primary DNS: Enter the Primary domain name server that
translates the hostnames into IP address.
•
Secondary DNS : Enter the Secondary DNS server address that
backups the Primary DNS.