Issue 21 - February 2000
Hands-Free Answer Back
You can answer a Voice Call without lifting the Handset (On-Hook).
Before receiving any Calls, check to see if the MIC indicator is on.
If not lit then the microphone is turned off, press the MIC Key so that the MIC indicator lights.
If the MIC is turned on you can turn it off by pressing the MIC Key.
If MIC Light is not lit
Internal Call Pick-Up
Zone Paging
You can Page using the speaker of the Keyphones. This is done to Keyphones in a specific zone.
There can be up to 3 Zones (system programming required).
Zone Page All
You can page all the Keyphones in the system together .
© Panasonic UK Ltd.
Speak through the built-in microphone.
•
The MIC indicator will flash
Press MIC Key.
•
The MIC indicator will light up.
You can now speak to the other party without using the Handset.
Lift the handset.
If the telephone has a speakerphone, simply press the ON/OFF
key.
Dial 7 0 to answer the Internal Call
1. Lift the Handset.
•
Listen for Internal dial tone.
2. Dial the desired paging area #01, #02 or #03.
•
The INT indicator will light up.
3. Make your announcement into the mouthpiece of the Handset.
1. Lift the Handset.
•
Listen for Internal dial tone.
2. Dial #00 to page all Keyphones.
•
The INT indicator will light up.
3. Make your announcement into the mouthpiece of the Handset.
•
If an external paging system is connected this will be paged
also.
•
For external paging refer to Page 33.
- 17 -
A-Series (UK)
E & OE