Easy Series Control Panel
5
System Test and Maintenance
Test the system for proper operation when installation and configuration are complete.
4
4
Notice!
After system installation and any control panel programming, perform a complete system test.
A complete system test includes testing the control panel, all devices, and communication
destinations for proper operation.
Bosch Security Systems, Inc.
Press the System Test button on the control panel board for one sec. The system
provides instructions throughout the test. Follow all instructions.
Contact the central monitoring station (CMS) to verify that all necessary test reports
were received, including test reports from all installed input and output devices.
Quick Start Guide
System Test and Maintenance | en
2014.09 | 01 | F.01U.306.216
11