GE MapSight User Manual page 52

Aim at the ground. The on screen indicators will guide you to the
spot directly below the Point of Interest on the wire.
Follow the arrows until your MapSight is aimed at the point on
the ground directly below the wire and the arrows disappear.
Once you are satisfied, Tap the Next button to continue.
Tip: If you are in a situation where you cannot see the point on
the ground directly below the wire, you can aim at a point on
the ground at the same height instead (only the vertical height
will be used at this stage).
Recompose your scene with the measurement superimposed,
and tap the Next button to finalize the measurement.
MapSight U ser M anual Page 4 8 www.gemapsight.com/support
MS-101-14-12-34.0