Table of Contents
Advertisement
RPS
3
Installing RPS
3.1
Hardware Installation
3.1.1
Installing a Modem
When using an internal modem, consult the documentation accompanying your modem for
physical installation.
3.1.2
Protecting AC Power and Phone Lines
Protect your hardware and data from costly damage by protecting the AC power source and
the phone line for the modem. Several manufacturers offer devices that provide combined AC
and telephone line protection. Contact your computer dealer for more information on these
devices.
3.2
Installing RPS
1.
Figure 3.1 RPS Startup
2.
Bosch Security Systems, Inc.
Insert the RPS CD-ROM into your CD-ROM drive.
The RPS startup program should automatically start.
If the startup program does not automatically start:
a.
Select Start > Run...
b.
At the prompt, type: X:\Winopen rps_menu.hta
("X" = the drive letter assigned to your CD-ROM drive.)
Installation Guide
Installing RPS | en
11
4998141259 | 09 | 2008.10
Advertisement
Table of Contents
