Chapter 4 Connecting Cables
4.2 Host Interface Connection
Procedure
1
2
2-1
2-2
FUJITSU Storage ETERNUS DX60 S2 Disk storage system User's Guide -Installation-
Remove the connector cover attached to the FC ports.
Remove the connector cover attached to the FC port of the controller 0 (CM#0) or
controller 1 (CM#1).
Connector cover
Keep the removed connector covers in a safe place where they will
IMPORTANT
not be lost.
Connect the FC cable to the ETERNUS DX Disk storage system.
Remove the covers from the FC cable connectors.
Insert the FC cable connectors in the controller 0 (CM#0) and controller 1 (CM#1) FC
ports.
CAUTION
•
Copyright 2014 FUJITSU LIMITED
Do
When connecting the FC cables, position them so that they
will not obstruct replacement of the power supply unit or
controllers by the maintenance engineer.
65
P3AM-5502-05ENZ0