Table of Contents
Advertisement
Setting Up Your Meter - Setting the Date, Time and Volume
4. Time format 12/24H selection
With the time format blinking, press the Left or Right button to switch
between 12H and 24H. Press the Main button to confirm. Once
confirmed, the Hour Setting will appear.
5. Hour setting
With the hour blinking, press the Left or Right button until you see
the current hour. Press the Main button to confirm. Once the hour is
confirmed, the Minute Setting will appear.
6. Minute setting
With the minutes blinking, press the Left or Right button until you see
the current minute. Press the Main button to confirm. Once the
minute is confirmed, the Volume Setting will appear.
20
4a)
4b)
5)
6)
Setting Up Your Meter - Setting the Date, Time and Volume
7. Volume Setting
With the volume blinking, press the Left or Right button to turn the
volume on or off. Press the Main button to confirm and finish the
settings.
NOTE
-
If you do no change any settings during Meter Set-up for over 2 minutes, the GE200 Blood Glucose Meter
will leave setting mode and power off automatically.
7a)
7b)
21
Hide quick links:
Advertisement
Table of Contents
