Operating Time Counter; Reading The Operating Time; Displaying The Operating Time - Electrolux Washing machine Service Manual

11 Operating time counter

It is possible to display, with a specific procedure, the operating time of the appliance, which is counted
from the first switching on.
This option is available only in models with display. The maximum memorization capacity is 6550 operating
hours.
Only the operating time of normal programmes is displayed (not diagnostics cycles)
The actual time of the cycle performed is counted (not the pauses, the delayed start time, rinse hold
and the soak phases)
The memorization is precise to within 30 seconds for each programme
Only whole hours are displayed (1h and 59min = 1h)

11.1.1 Reading the operating time

1. Reset the current programme and switch the appliance off.
2. Press the FABRICS (1) TEMPERATURE (2) buttons simultaneously and then, holding the buttons
down, switch the appliance on using the ON/OFF button.
3. Hold the buttons down for at least 2 seconds.

11.1.2 Displaying the operating time

The operating time is displayed two digits at a time: the first pair of digits shows the thousands and
hundreds; the second pair shows tens and units.
For example, a total operating time of 6,550 hours will be displayed as follows:
1 →
Blank display for two seconds
SOI/DT 2005-07 dmm
2 →
The first pair of digits is
displayed for two seconds:
- thousands (6)
- hundreds (5)
55/59
3 →
The second pair of digits is
displayed for two seconds:
- tens (5)
- units (0)
599 37 22 15