GE DVSR xU User Manual page 76

72
To set the RS-485 settings
1. In the PTZ menu set up the Baud Rate, Data Bits, Stop Bits, Parity, and Flow Ctrl. For each one in
turn, select the required configuration as provided by the dome manufacturer. For example, the
configuration for GE Security is: (default)

Baud rate – 9600

Data bits – 8

Stop bit – 1

Parity – None

Flow Crtl - None
To set the PTZ protocol
1. In the PTZ menu go to the Protocol list box and select one of the built-in PTZ protocols listed. See
Table 20.
Table 20 Built-in PTZ protocols
GE RS-485 (default)
VideoTec
VCL SpeedDome
Techwin
EVI-D30
Samsung
Siemens
Philips 3
Philips 2
Philips
Panasonic
To set the PTZ address
1. In the PTZ Addr. box enter a number for your PTZ address. If using the front panel or remote
control, press EDIT to delete a preceding number and Enter to confirm the entry. If using the
mouse, an onscreen numeric keypad appears.
To set camera preset positions
The preset position is the function to program monitoring positions (preset positions) associated with
position numbers. By entering the position number, you can move cameras automatically to the
preset positions. You can set up to 128 preset numbers. A preset number must have three digits. This
option is only available with cameras provided with the preset feature.
LG
Infinova
HIKVISION
DM DynaColor
DennardDome
DeltaDome
BBV
Tyco AD
AD
Pelco D
Pelco P
DVSR xU User Manual