Receive Message Memory - Kenwood TH-78A Instruction Manual

H Paging mode
Press any key

6 Receive Message Memory

This transceiver has 10 incoming message memory
channels, in which received messages are stored.
If you press the MESSAGE key in the message
mode, the last stored message is displayed.
You can store your message in memory using one of
the following two methods. You can select the
desired mode.
n
If there is data in all 10 message memory channels,
new data is written into channel 0 (Factory default).
n
If data is stored in all 10 message memory channels,
new data is not written into any channel.
Press and hold the MESSAGE key, and switch the
power on to change this function.
Receive message memory clear
Press and hold the M key for longer than one
second, then press the MESSAGE key.
47