Related Manuals for Kenwood KDC-1023
Summary of Contents for Kenwood KDC-1023
- Page 1 KDC-4023 KDC-3023 KDC-2023 KDC-1023 KDC-1023S CD-RECEIVER INSTRUCTION MANUAL © B64-2476-00 / 00 (MW/IW)
-
Page 2: Table Of Contents
Contents Safety precautions...3 About CDs...5 General features ...6 Power Selecting the Source Volume Attenuator Loudness System Q Audio Control Speaker Setting Clock Display Adjusting Clock DSI (Disabled System Indicator) Theft Deterrent Faceplate Tuner features ...9 Tuning Mode Tuning CRSC (Clean Reception System Circuit) Station Preset Memory Auto Memory Entry Preset Tuning... -
Page 3: Safety Precautions
KENWOOD disc changers/ CD players released in 1998 or later can be connected to this unit. Refer to the catalog or consult your Kenwood dealer for connectable models of disc changers/ CD players. Note that any KENWOOD disc changers/ CD... - Page 4 NOTE • If you experience problems during installation, consult your Kenwood dealer. • If the unit does not seem to be working right, try pressing the reset button first. If that does not solve the problem, consult your Kenwood dealer.
-
Page 5: About Cds
About CDs Handling CDs • Don’t touch the recording surface of the CD. • CD-R and CD-RW are easier to damage than a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc. •... -
Page 6: General Features
Release button (KDC-4023/KDC-3023/KDC-2023 only) ATT/ LOUD KDC-4023/KDC-3023/KDC-2023 ATT indicator LOUD indicator Clock indicator SYSTEM Q indicator KDC-1023/KDC-1023S LOUD indicator ATT indicator Clock indicator SYSTEM Q indicator Power Turning ON the Power ¢ Press the [SRC] button. Turning OFF the Power Press the [SRC] button for at least 1 second. -
Page 7: System Q
Each time the button is pressed for at least 1 second the Loudness turns ON or OFF. When it’s ON, "LOUD" indicator is ON. System Q You can recall the best sound setting preset for different types of the music. Select the source to set Press the [SRC] button. -
Page 8: Clock Display
General features Clock Display Press the [CLK] button. Each time the button is pressed the clock display turns ON or OFF. When it’s ON, the clock indicator is ON. Adjusting Clock Select the clock display Press the [CLK] button. Enter clock adjustment mode Press the [CLK] button for at least 2 seconds. -
Page 9: Tuner Features
Tuner features #1 - 6 KDC-4023/KDC-3023/KDC-2023 ST indicator Preset station number Band display Frequency display KDC-1023/KDC-1023S Band display Preset station number ST indicator Frequency display Tuning Mode Choose the tuning mode. CRSC ¢ Press the [AUTO] button. Each time the button is pressed the Tuning mode switches as shown below. -
Page 10: Station Preset Memory
Tuner features Station Preset Memory Putting the station in the memory. Select the band Press the [FM] or [AM] button. Select the frequency to put in the memory Press the [4] or [¢] button. Put the frequency in the memory Press the [#1] —... -
Page 11: Cd/External Disc Control Features
CD/External disc control features SCAN M.RDM KDC-4023/KDC-3023/KDC-2023 Disc number Track time IN indicator KDC-1023/KDC-1023S IN indicator Track time SCN indicator Playing CD DISC- DISC+ When a CD is inserted ¢ Press the [SRC] button. Select the "CD" display. Eject the CD Press the [0] button. -
Page 12: Fast Forwarding And Reversing
CD/External disc control features Fast Forwarding and Reversing Fast Forwarding Hold down on the [¢] button. Release your finger to play the disc at that point. Reversing Hold down on the [4] button. Release your finger to play the disc at that point. Track Search Selecting the song you want to hear. -
Page 13: Direct Track Search
Function of the KDC-4023 Direct Track Search (Function of remote) Doing Track Search by entering the track number. Enter the track number Press the number buttons on the remote. Do Track Search Press the [4] or [¢] button. Canceling Direct Track Search Press the [38] button. -
Page 14: Loading And Replacing The Battery
Basic Operations of remote Accessory of the KDC-4023 Loading and Replacing the battery Use one lithium battery (CR2025). Insert the batteries with the + and – poles aligned properly, following the illustration inside the case. 2WARNING Store unused batteries out of the reach of children. Contact a doctor immediately if the battery is accidentally swallowed. -
Page 15: Accessories
Accessories External view External view ... Number of items ...1 ...2 (KDC-4023/KDC-3023/KDC-2023 only) The use of any accessories except for those provided might result in damage to the unit. Make sure only to use the accessories shipped with the unit, as shown above. Installation Procedure 1. -
Page 16: Connecting Wires To Terminals
Connecting Wires to Terminals KENWOOD disc changer control input (KDC-4023/3023/2023 only) To connect the Disc changer, consult your Disc changer manual. If no connections are made, do not let the wire come out from the tab. When using the optional power amplifier, connect to its power control terminal. -
Page 17: Installation
Installation ■ Installation Firewall or metal support Screw (M4X8) (commercially available) Metal mounting strap Self-tapping screw (commercially available) (commercially available) Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip). ■... - Page 18 Installation ■ Removing the hard rubber frame Engage the catch pins on the removal tool and remove the two locks on the lower level. Lower the frame and pull it forward as shown in the figure. Lock Accessory2 Removal tool When the lower level is removed, remove the upper two locations.
-
Page 19: Troubleshooting Guide
Troubleshooting Guide What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. General The power does not turn ON.01 ✔... - Page 20 Troubleshooting Guide Disc source "AVin" is displayed without achieving External disc control ✔ Unsupported disc changer is connected.51 ☞ Use the disc changer mentioned in the IMPORTANT INFORMATION of the section on <Safety precautions>(page 3). The specified disc does not play, but another one plays ✔...
- Page 21 60°C (140°F), the disc will start playing again. Discs are being exchanged in the Disc changer. The CD player section is not operating properly. ➪ Reinsert the CD. If the CD cannot be ejected or the display continues to flash even when the CD has been properly reinserted, please switch off the power and consult your nearest service center.
-
Page 22: Specifications
Frequency range (10 kHz space) ...530 kHz – 1700 kHz Frequency range (9 kHz space) ...531 kHz – 1611 kHz Usable sensitivity (S/N = 20dB) ...28 dBµ (25 µV) CD player section Laser diode ...GaAlAs (λ=780 nm) Digital filter (D/A)...8 Times Over Sampling D/A Converter ...1 Bit...