Table of Contents
Advertisement
Cleaning and care
^ Clean the surface of the main
dispenser with a damp sponge cloth.
^ Now reassemble the dispensing unit
in reverse order.
Make sure that the upper connecting
piece a audibly clicks into place.
Push firmly when inserting the
dispensing nozzles b into the
dispensing unit.
^ Reinsert the dispensing unit into the
main dispenser.
^ Replace the cover.
50
Milk valve maintenance
You should put the milk valve in
maintenance mode once per week to
ensure good quality milk froth.
^ Tap x .
^ Tap the arrow key Y until
"Maintenance" is highlighted.
Tap the OK button.
^ Tap the arrow keys until "Condition
milk valve" is highlighted. Tap the OK
button.
The milk valve will go into maintenance
position.
Important! Before you confirm
"Leave maintenance position" with
"OK", you must remove the cleaning
brush. Otherwise, the coffee
machine will be damaged.
^ Insert the brush into the milk valve.
Move the brush back and forth.
^ Tap the OK button.
The milk valve will move into the stan-
dard position and the milk lines are
rinsed.
Advertisement
Table of Contents
