Driving Recorder Model:CY-VRP110T1/T2/T3/T4/T5 Operating Instructions Please read this instructions carefully before using this product and keep this manual for future reference. 24240482301-A PTW0813-0 Printed in China...
Contents Safety Information ..............3 FCC Statement ................ 8 WEEE Notice ................9 CE Regulatory Notice ............10 Notes on Installation .............. 10 Caution................... 11 Introduction ................12 Features ..............12 Package Contents ..........12 Product Overview ..........13 Getting Started..............14 Inserting the Memory Card ........
Page 3
3.2.2 Viewing Photos ............. 25 3.2.3 The Playback Screen ........... 26 3.2.4 Deleting Files ............27 Adjusting the Settings ............28 Using the Menu ............. 28 Menu Tree ............. 29 Installing the Software ............32 Specifications ..............33 Trouble Shooting ..............35...
Safety Information This pictograph intends to alert you to the presence of important operating instructions and installation instructions. Failure to heed the instructions may Warning result in severe injury or death. Warning Observe the following warnings when operating this unit. ■...
Page 5
■ Keep optional accessories (SD Card, etc.) away from the reach of children. There are risks that children may swallow the accessory. Keep accessories away from the reach of children. In the event of swallowing any the accessory, seek medical care immediately.
Page 6
Safety Information Warning Observe the following warnings when installing this unit. ■ Install the product so that it does not hinder the view of the vehicle. ■ Never install the unit within the range of air bag movement or in a position that obstructs activation of the of air bag. Please also verify warnings and precautions regarding the vehicle’s air bag.
Page 7
Safety Information Caution Observe the following cautions when using this unit. ■ When disposing of the unit, follow statutory regulations to recycle the built-in lithium battery, so as to prevent environmental pollution. ■ For some vehicles, the unit continues recording after the engine has being shut off.
Page 8
Safety Information Caution Observe the following cautions when installing this unit. ■ It is recommended that the unit should be installation by a professional. The installation requires specialty and technical experience; to ensure safety, entrust the dealer to carry out the installation. ■...
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
WEEE Notice Information for Users on Collection and Disposal of Old Equipment and Used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with your...
CE Regulatory Notice Herewith confirm to comply with the requirements set out in the Council Directives on the Approximation of the Laws of the Member States relating Electromagnetic Compatibility of Radio and Telecom device (1995/5/EC); the Low Voltage Directive (2006/95/EC); the Restriction of The Use of Certain Hazardous Substances in Electrical And Electronic Equipment Directive (2002/95/EC), Turkish EEE Directive;...
Caution Use the authorized charger only. Never disassemble by yourself. Never short-circuit the battery. Exposing the camcorder to open flames can cause explosion. Due to local laws and vehicles safety considerations, do not manually operate the device while driving.
1 Introduction 1.1 Features • Full HD Car Camcorder (1920x1080 @ 30fps) • 2.4” LCD color screen • 128 degree Wide angle lens • Motion detection • Automatic Emergency recording for collision detection • Supports Micro-SDHC up to 32GB (Class 6 or greater speed required for HD video) 1.2 Package Contents The package contains the following items.
1.3 Product Overview Item Item Bracket Socket LED Light Microphone LCD Panel Power Button Up Button ( Memory Card Slot Down Button ( USB Connector Enter Button ( HD(Mini HDMI) Connector Wide Angle Lens Back Button ( Speaker Note: To operate the device, press the corresponding buttons (7, 10, 11, 12) according to guide icons shown the screen.
2 Getting Started 2.1 Inserting the Memory Card Insert the memory card with the gold contacts facing the back of the camcorder. Push the memory card until it clicks into place. (Use class 6 or above the micro SD cards for this camcorder; It is recommended to format the micro SD cards before the initial use.) To remove the memory card Push to eject the memory card out of the slot.
2.2 Installing in Vehicles 2.2.1 Mount to Windshield Attach the bracket to the device. Slide it into the bracket holder until you hear a click. With the suction-cup laying flat, position the suction-cup on the windshield. Hold the base firmly on the windshield and press down the clamp to mount the car holder to the windshield.
2.2.2 Adjust the device position Loose the knob to swivel the device vertically. Knob Loose the knob to swivel the device horizontally up to 360°. Knob Then tighten the knob to make sure the device is securely locked in place.
2.3 Connecting to Power Use only the exclusive car adapter to power up the device and charge the built-in battery. Connect one end of the car adapter to the USB connector of the camcorder. Plug the other end of the car charger to the cigarette lighter socket of your vehicle.
2.4 Powering the Camcorder On / Off 2.4.1 Auto Power On/Off Once the vehicle engine is started, the device automatically turns on. If the Automatic Record function is enabled, the recording will automatically start right after the camcorder powers on. See Set Automatic Recording (2.5.1).
2.5.1 Set Automatic Recording To enable the recording to start automatically after you turn on the power, do the following: Press the button to enter the OSD menu. Press the button to select Automatic Record and press the button. Press the button to select On and press the button.
3 Using the Car Recorder 3.1 Recording Videos 3.1.1 Record videos while driving When the vehicle engine starts up and the Automatic Record function is enabled, the camcorder automatically turns on and starts recording. Recording will automatically stop when the engine is switched off. Or, press the button to stop recording manually.
3.1.3 Record all other types of videos Press the button to start recording. Press the button to stop recording. Note: 1. One video file is saved for every 3 or 5 minutes of recording. See Using the Menu (4.1). 2. The device saves the recording in the memory card. If the memory card capacity is full, the oldest file in the memory card is overwritten.
3.1.5 The Recording Screen Item Description Duration Indicates the recording duration. Indicates sound will not be recorded with the Voice Record video. Enter the OSD menu to enable "Voice Record". There are two options for the Smart Scene Mode: Smart 1.
Prompt : reset Prompt : NOT reset of date / time of date / time Guide icon Press the button to stop the recording. (Stop) Press the button to continuously record Guide icon the video in one file until the recording is (Emergency) manually stopped.
3.2 Playback Videos and Photos If recording is in progress, press the button to stop recording. The standby screen is displayed. Press the button to enter the OSD menu. Press button , the select File Playback and press the button. Press the button to select the file category that you want to browse and press the...
3.2.1 Playing Videos To play videos, do the following: If recording is in progress, press the button to stop recording. Press the button to enter the OSD menu. Press the button to select File Playback and press the button. Press the button to select Video or Emergency and press the button.
3.2.3 The Playback Screen Video Playback Screen Photo Playback Screen Item Description Date and time Indicates the recorded date and time. Press the button to return to file selection Guide icon display. (Back) Press the button to view the previous Guide icon video/photo.
3.2.4 Deleting Files To delete file(s), do the following: If recording is in progress, press the button to stop recording. Press the button to enter the OSD menu. Press the button to select File Deletion and press the button. Press the button to select the file category and press the button.
4 Adjusting the Settings 4.1 Using the Menu You can customize the video recording and other general settings via the on-screen display (OSD) menus. If recording is in progress, press the button to stop recording. Press the button to enter the OSD menu. Press the button to select a menu option and press the button to enter the selected menu.
4.2 Menu Tree Refer to the below table for details on menu items and available menu options. Menu option Description Available option Select the file category Video / Emergency / File Playback that you want to view. Picture. Default: Video Press button to adjust the value, press...
Page 31
Menu option Description Available option recording starts. min. / Off. Default: On Enable/Disable the voice Voice Record On / Off. Default: On recording. Beep Enable/Disable the beep. On / Off. Default: On Enable / Disable the On / Off. Automatic device to automatically Record record video after the...
Page 32
Menu option Description Available option Set the delay duration 10 sec. / Off. Delay Shutdown before turning off the Default: 10 sec power. Present a crisp and clear picture quality with On / Off. harmonious contrast in a Default: Off high contrast, high discrepancy environment.
5 Installing the Software 1. Place the CD disc bundled with the car camcorder in your PC/Laptop optical drive. 2. If the CD does not execute automatically, please use Windows File Manager to execute the Install_CD.exe file in the CD. The following screen will be shown up.
Specifications Item Description Image sensor 1/3” CMOS sensor The device : 5V,1A ; Car Charger : 2~24V Input Voltage Recording with battery charging : 4.4 W , Power Preview with battery charging : 3.7W Consumption 2304 (H) x 1536 (V) Effective pixels Storage media Supports Micro SDHC, up to 32GB class 6 or above...
Page 35
Item Description Speaker Interface Mini USB, Mini C Type HDMI Built-in 470mAH Li-polymer rechargeable (This battery Battery is NOT replaceable) Operating -10° ~ 60° C Temperature Operating 20 ~ 70% RH Humidity Storage -20° ~ 80° C Temperature Dimensions 63 x 70 x 28.7 mm Weight Approx.
Trouble Shooting Problem:Function key can not work after the screen become blue color or after formatting the card or the screen show ‘’on the process ‘’ Solution : reset the device via press and hold the power key for over 4 seconds. ...
Page 37
Problem : Why the sound of recording file can not heard when using other playback software ? Solution : Please use the QUICKTIME PLAYER software from the CD in the gift box package . Problem : Why the right figure appears on screen when power on ? Solution : Remind the user to reset the time before start to use the device .