Camera Settings; Camera Selection - Sharp IV-C35M User Manual

2-3 Camera settings

[1] Camera selection

The cameras that are compatible with the controller (IV-C35M) are as follows:
Compatible cameras
IV-C30C5 (color camera)
IV-S30C3 (high-speed monochrome camera)
IV-S30C4 (micro, high-speed monochrome camera)
* Mixed use of color camera (IV-C30C5) and high-speed monochrome camera (IV-S30C3/C4) is not
supported.
Operating procedure
1. Select the "CAMERA TYPE" item on the "SYS-
CND" screen and press the SET key.
2. Select "COLOR" or "MONOCHROME" on the
" SELECT CAMERA" line.
When a color camera is used.
SELECT CAMERA
Select "COLOR" from the popup menu.
SEL-CAMERA
Select either "CAM1" or "CAM2" from the
popup menu.
WHITE BALANCE
Adjust the white balance of camera image.
When a monochrome camera is used
SELECT CAMERA
Select "MONOCHROME" from the popup
menu.
CAPTURE IMG MODE
Select image capture mode from "FULL,"
"HALF" or "FLL+HALF."
Compatible cameras
Camera
settings
(system
conditions)
IV-C30C5 (color)
Camera selection
Image capture mode
- See page 2-18
2-17
Setting the Operating and System Conditions
CAMERA SET SCREEN COND SAVE
1SELECT CAMERA
COLOR
2SEL-CAMERA
CAMERA1
3WHITE BALANCE
SET[(224.208) ~ (287.271)]
SET=SELECT A MENU ESC=BACK SEL=CHNG IMG TRG=FUNC
CAMERA SET SCREEN COND SAVE
1SELECT CAMERA
MONOCHROME
2CAPTURE IMG MODE FULL
IV-S30C3 (high-speed)
IV-S30C4 (micro and high-speed)
Color Monochrome
--- Full, half, or full + half mode
COLOR F C1 DRK
COLOR
MONOCHROME
CAMERA1
CAMERA2
COLOR F C1 DRK
COLOR
MONOCHROME
FULL
HALF
FULL + HALF
2