Cooling Mode - Haier AU282AHBEA Service Manual

Select temp. button
3
Press TEMP button
Every time the button is pressed, temp.
setting increases 1 C
Every time the button is pressed, temp.
setting decreases 1 C
If the button is kept pressed, setting will
increase or decrease quickly.
Press FAN,For each press, operation mode
4
changes as follows:
Remote
LOW
controller
Unit runs at the speed displayed on LCD.
When fan speed is AUTO,it is changed automatically
according to the indoor temperature.
Press ON/OFF button
5
Unit stops running.

Cooling Mode

TEMP
ON
OFF
FAN
HEALTH
1
4
5
MODE
SLEEP SWING
CLOCK SET
TIMER
HEAT
RESET LIGHT LOCK
MID HIGH AUTO
1 Press ON/OFF button
Unit starts running.
The previous status appears on the display
(except. TIMER, SLEEP mode)
Press MODE button. For each press,
2
operation mode changes as follows:
Remote
controller
Select cooling operation, Shows"
Cooling operation starts.
Select temp. button
3
Press TEMP button
setting increases 1 C
setting decreases 1 C
If the button is kept pressed, setting will
increase or decrease quickly.
Press FAN button. For each press, fan speed
4
changes as follows:
Remote
controller
Unit runs at the speed displayed on LCD.
When fan speed is AUTO,it is changed outomatically
according to the indoor temperature.
Press ON/OFF button
5
Unit stops running,and when entry this mode for the
next time,it will show the previous setting.
>a__WcU[S^ <[c >a`V[e[a`Wc
Note:
During Auto run operation, temp. setting will be
shown in LCD display, unit will select heating,
cooling or fan operation according to the room
temp.
AUTO COOL DRY FAN
Every time the button is pressed, temp.
Every time the button is pressed, temp.
LOW MID
-98-
HEAT
"
HIGH AUTO