Product Configuration; Accessories - Pioneer SGY-PM910H Installation Manual

Product Configuration

Accessories

This product contains the following parts.
For FC-9000
For FC-6800
Strain gauge unit cover x 1 for each type
Patch type x 2
•
User's Manual (this document)
•
Warranty Card
•
Important Information for the User
•
Batteries (CR2032) x 2
(pre-installed in the left and right sensors)
•
Right transmitter cover (metallic gray)
•
Hex screws (M2.6 x 8mm) x 3
(for the right transmitter x 3)
Pedaling monitor sensor (right side)
Pedaling monitor sensor part (right side)
Pedaling monitor sensor (left side)
Left transmitter
Strain gauge unit
LED
Pedaling monitor sensor part (left side)
Magnet
Arm type (right side)
Others
•
Hex screws (M2.6 x 5mm) x 3
(spare for the right transmitter cover x 3)
•
Cable ties x 10
(for the left magnet x 2, for the right magnet
x 2, spare x 6)
•
Cushions for the arm type magnet installation x 2
Right transmitter
Junction cable
Strain gauge unit
Junction box
Chain ring adapter
Arm type (left side)
EN
5