1.8.3
Receiving Call Waiting (Call Waiting/Off-hook Call
Announcement [OHCA]/Whisper OHCA)
During a conversation, you can be informed of a call waiting with a tone or voice announcement through
your built-in speaker or handset. (Default: Disable—No call [Intercom calls]/No tone [Outside calls])
Call Waiting Tone:
a waiting tone through the built-in speaker of PT/handset of SLT. To change the tone from PT, refer to
"3.1.2 Settings on the Programming Mode".
OHCA:
a voice announcement through the built-in speaker
Whisper OHCA:
a voice announcement through the handset
To set/cancel for intercom calls (Manual Call Waiting)
PT/SLT/PS
Off-hook.
To set/cancel for outside calls (Automatic Call Waiting)
PT/SLT/PS
Off-hook.
•
OHCA is only available with certain digital proprietary telephones.
•
Whisper OHCA is only available with certain digital proprietary telephones and IP proprietary
telephones. In addition, both you and the other party must use supported telephones.
•
A PDN extension can only receive OHCA or Whisper OHCA from the corresponding SDN
extension. When a call is made from another extension, a PDN extension will receive a call
waiting tone. (→1.5.1 Primary Directory Number (PDN)/Secondary Directory Number (SDN)
Extension (KX-TDA100/KX-TDA200/KX-TDA600 only))
7
3
1
Enter
731.
7
3
2
Enter
732.
1.8 Setting the Telephone According to Your Needs
0
No call
OR
1
Tone
OR
2
OHCA
OR
3
Whisper OHCA
Enter 0 to 3 as you desire.
0
No tone
OR
C.Tone
1
Tone
Enter 0 or 1.
C.Tone
On-hook.
On-hook.
User Manual
123