7.4.2 H.323 QSIG Network
This section gives an overview of H.323 QSIG networks.
Image of a H.323 QSIG network:
Node 1:
KX-NS1000
Resources for Node 1
Features
•
H.323 QSIG networks can include non-KX-NS1000 PBXs (e.g., KX-TDE200, KX-NCP500).
•
Resources are not available to extension users of other PBX without explicit configuration.
Conditions
•
PBXs in an H.323 QSIG network must be connected over a private IP network.
Bandwidth Requirements
Refer to "7.2.3 Bandwidth Assessment".
Required Items
•
V-IPGW16: Virtual 16-Channel VoIP Gateway Card
Note
The following activation key is required for enhanced QSIG network features (NDSS, Centralised Voice
Mail, etc.).
•
KX-NSN002: Activation Key for QSIG Network (QSIG Network)
Networking Notes
When a KX-NS1000 is included in the H.323 QSIG network, the PBX must be specified as a Master unit.
Note
•
For more details about H.323 QSIG networks, refer to "4.3.1 TIE Line Service" in the Feature Guide.
•
For details about configuring and programming a H.323 QSIG network, refer to "
in the PC Programming Manual.
H.323 QSIG
Network
Resources for Node 2
Node 2:
KX-NCP500
7.4.2 H.323 QSIG Network
TIE Line Access"
Installation Manual
243