When attaching Network Pack KA-DV5000 to DV Camcorder GY-DV5000, network related menus are added to the GY-DV5000 menu
screen.
This User's Guide explains settings for the network related menus, operation for recording streaming data to a CF (Compact Flash)
memory card and operation for sending streaming data using a LAN card. When a LAN card is connected, menu screen settings for the
Network Pack and GY-DV5000 can be operated from your PC.
Introduction
Menu screen
Network settings
Recording on a CF card
Movie clips
LAN card
Network Pack Setup
Others
Characters and symbols used in this instruction book
Caution
Memo
* In general, the names of products manufactured by other companies and mentioned in these
instructions are trademarks or registered trademarks of these companies.
Symbols like ™, ©, ®, etc., are not used in these instructions.
Cautionary notes concerning operation of the unit
Reference such as restrictions of features, etc.
Reference page or item
2
Lock release button
CF memory card or
LAN card
Cover
Section A
Card slot
EJECT button
KA-DV5000
●
Make sure the power of GY-DV5000 is off when inserting/
removing a CF memory card/LAN card. Inserting/removing
a card with the unit power on may damage the data storage
section of the CF memory card or the card itself.
●
Do not use the wireless LAN card continuously for more
than 48 hours.
Turn off the GY-DV5000 power.
Press and hold the lock release button and open the cover.
Insert a card into the KA-DV5000 card slot. Then, close the cover.
● The cover may not close depending on the wired LAN card or the card shape. In this case, remove the cover by pressing section
A and pulling on the cover.
Turn on the GY-DV5000 power.
Turn on the KA-DV5000 power.
LCD screen
Card status display
: No card
: LAN card
: CF memory card
Turn off the GY-DV5000 power, or turn off the KA-DV5000 power.
Open the cover, press the EJECT button of KA-DV5000 and remove the card.
● The KA-DV5000 accepts the following cards for which operation has
been confirmed: (As of August 2002)
Operating voltage
5 V or 3.3 V
Current consumption
Max. 500 mA (5 V)
• Wired LAN-card
US:
EA2900-117 (Revision C) (Name of manufacturer: Socket
Communications, Inc)
*1
Europe: EA2903-162 (Revision C) (Name of manufacturer: Socket
Communications, Inc)
*1
Asia:
EA2906-194 (Revision C) (Name of manufacturer: Socket
Communications, Inc)
*1
* Revision indicated on the upper right of package production label.
• Wireless LAN-card
TEW-PC16 (firmware version 0.8.3 or later) (Name of manufacturer:
TRENDware)
WCF11 (Name of manufacturer: LINKSYS)
*2
TEW-201PC
TEW-202CF
Wireless Networker Compact Flash
(Name of manufacture: SYMBOL TECHNOLOGIES INC.)
FCCID: H9PLA4B7P
TEW-PC202CF
(Name of manufacture: TREND net)
FCCID: MXF-F90120
Low Power WLAN CARD
(Name of manufacture: Socket Communications, INC)
FCCID: H9PLA4137P
AIR-PCM350
(Name of manufacture: Cisco Systems)
FCCID: LDK102040
• CF (Compact Flash) card
SDCFB-16 ~ SDCFB-256 (Name of manufacturer: SanDisk)
*1: Use PCMCIA card TYPE 1 or TYPE 2 adapter
*2: Use PCMCIA card TYPE 2 adapter
For the latest operational check card, visit the website below
or contact your JVC dealer.
http://www.jvc-victor.co.jp/english/pro/prodv/stream/
● Card status according to the inserted card type is displayed on
the LCD screen/viewfinder screen. ( page 4)
(The viewfinder will show the status in black and white.)
When turning the power on, the card status
display shown on left will flash during initial-
ization.
3
*1