Miele G 7881 Operating Instructions Manual page 65

,
The inlet hose must not be
shortened or damaged in any way
(see illustration).
See also the installation diagram
supplied.
AD water connection ö 0.6 - 10 bar
(60 - 1000 kPa) over pressure
(available as an optional extra)
As an option, the machine can be
supplied for connection to an AD water
supply of 0.6 - 10 bar (60 - 1000 kPa). If
the water pressure (flow rate) is below
1.5 bar (150 kPa) the water intake time
is automatically extended.
^ The AD pressure tested hose
(marked "H O pur") with a 3/4"
2
threaded union must be connected to
the on-site AD stopcock for purified
water.
If the AD water supply is not used,
the electronics must be
re-programmed by a Miele
approved service technician. The
inlet hose will remain on the rear of
the machine.
Plumbing
65