Inverter Circuit Board
Follow the steps below for disassembly.
1. Remove the rear cover. (See page 9-8.)
2. Remove the front cover. (See page 9-9.)
3. Remove the rear case. (See page 9-11.)
4. Remove the rear panel. (See page 9-13.)
5. Disconnect the 5 cables shown below. Remove 3 screws (1052).
6.
Remove the Inverter circuit board.
To install, reverse the removal procedure.
Rev. I
cable
MR Series Technical Reference Manual
screw (1052)
Inverter circuit
board (112)
cable
Disassembly and Assembly 9-33