Key Operator Mode; User Parameters - Panasonic DP-C406 Operating Instructions Manual

Key Operator Mode

No. 0 - 4
No. Parameter
00

User Parameters

01 Fax Parameters
For User Parameter settings, refer to Facsimile Settings (Option) in the Operating Instructions (For
Administrator Setup) of provided CD-ROM.
Network configuration should be set up by the system administrator.
User Parameters
No. 0 - 19
No. Parameter
00 Print UserParameterList
01 Logo
02 Character ID
03 ID No.
No. 20 - 39
No. Parameter
20 Selectable Domain (01)
21 Selectable Domain (02)
22 Selectable Domain (03)
23 Selectable Domain (04)
24 Selectable Domain (05)
25 Selectable Domain (06)
26 Selectable Domain (07)
27 Selectable Domain (08)
28 Selectable Domain (09)
29 Selectable Domain (10)
Refer to User Parameters (see page 43).
Refer to Fax Parameters (see page 45).
Comments
Print the User Parameter List.
To cancel printing the parameter setting list,
select "Stop" and "OK". While processing the
cancellation, panel operation is denied, and an
error beep is produced. The feeding paper(s)
will be ejected before completing the above
cancellation operation. If setting a parameter, an
asterisk mark (*) will be added before the
parameter number.
Set the Logo.
Ex: Panasonic
Set the Character ID.
Ex: HEAD OFFICE
Set the numeric ID.
Ex: 555 1212
Comments
Set domain names to display on the domain list.
Up to 10 domain names can be set.
After entering the part of the Email address
preceding at mark "@", select the desired
domain name.
Comments
Selective Item
Stop, Start
Up to 25 characters
Up to 16 characters
Up to 20 digits
Selective Item
Up to 30 characters
Standard
Setting
Start
Standard
Setting
43