Installation - Silvercrest SAR 28 A1 Operating Instructions Manual

Installation

Connection of an external subwoofer
Use the orange SUBW
To do this, follow the operating instructions for the external subwoofer.
Connection diagram
Installation
The device can be installed into any standard ISO mounting bay. In the event that
your vehicle does not have an ISO mounting bay, contact your local specialist
workshop, local dealer or the technical department of a general store.
NOTE
► Connect up the cables before fi nally installing the device.
Ensure that it is plugged in properly and that the system works correctly.
Installation instructions
■ Install the device in the bay provided or select the installation location so
that all buttons can be reached easily without the driver being impeded.
■ Only connect the device to a 12 V car battery that is installed properly.
■ Only connect up the device within the vehicle via the ISO plugs.
■ Install the device in such a way as to prevent heat build-up and so that the
device is adequately ventilated.
SAR 28 A1
cinch output to connect an external subwoofer.
26
Antenna Subwoofer
External amplifi er
1 2 3 4
5 6 7 8
1 2 3 4
ISO B
5 6 7 8
ISO A
GB
IE
9