46
Installation
Step 3
Set network address for LAN ports.
3
•
Interface: Select a LAN port you want to use (Ethernet 0 or
Ethernet 1).
•
DHCP: Select this option when a DHCP server is installed on the
network to allow IP address assignment. With this setting, the IP
address is assigned automatically.
•
IP Address: Enter the IP address.
•
Subnet Mask: Enter the subnet mask address.
•
Gateway: Enter the gateway address.
•
Primary DNS: Enter the Primary domain name server that
translates the hostnames into IP address.
•
Secondary DNS : Enter the Secondary DNS server address that
backups the Primary DNS.
Step 4
Set recording schedule.
•
Weekday: Sets the recording mode to weekday (Mon-Fri).
•
Weekend: Sets the recording mode to weekend (Sat-Sun).
Step 5
Set recording mode for the Continuous and Event recording.
•
Resolution: Selects the recording resolution.
•
Quality: Selects the recording picture quality.
•
Frame Rate: Selects the frame rate. The frame rate is the number
of recorded frames per second. According to resolution, the
frame rate is set automatically.