2.1.1 Programming Instructions
2.1 PT Programming
2.1.1 Programming Instructions
Required Telephone/Extension
PBX settings can be customized through system programming by using a proprietary telephone (PT) with a
multiline display, such as the KX-NT343 or KX-NT346. To access system programming, the Class of Service
(COS) assigned to the PT's extension must be programmed to allow system programming, or the PT must be
connected to the lowest-numbered port on the card installed in the lowest-numbered slot.
Only one system programming session can be performed at a time. This means that only one user can access
system programming at a time, whether through a PT or PC.
For a list of characters that can be entered during system programming, see Section 1.1.3 Entering
Characters.
Buttons and Functions
KX-NT300/KX-DT300
SHIFT
PAUSE
14
PT Programming Manual
Fixed Buttons
KX-NT136/KX-T7600
SHIFT
PAUSE
HOLD
AUTO ANS
MESSAGE
MUTE
KX-T7200/KX-T7400
*1
REDIAL
SP-PHONE
FWD/DND
CONF
AUTO DIAL
STORE
—
SHIFT
PROGRAM
PAUSE
HOLD
AUTO ANSWER
MESSAGE
MUTE
Function
PREVIOUS
NEXT
(Page up)
(Page down)
ENTER
Back to Previous Menu
(CANCEL)
SHIFT
PROGRAM
END
SELECT
Document Version 2009-12