Installing The Thermostat; Advanced Settings - LG DFSWLWT0A Instruction Manual

INSTALLING THE THERMOSTAT

Locat e your Thermostat approximately 5 ft (1.5m) meters above the
floor. For best results ensure that the thermostat is away from direct
sunlight and on an interior wall.
Using the dimensions 3.2" wide 3.1" (81mm x 78mm) high or the
template included, locate where the thermostat will be placed and cut
out the space on the wall.
Insert the battery backplate into the cut-out area ensuring the top is up
Mark the four inside holes for drilling the 3/16" holes required for the
plastic screw anchors
Remove the battery backplate and drill four (4) 3/16" holes in these
locations.
Insert the plastic gyproc screw anchors and tighten them securely.
Mount the battery backplate using four (4) supplied screws
Insert two (2) D batteries into the recess. Important: Use only Alkaline
Size D batteries for normal life operation.
Align four (4) pins on the thermostat to the battery backplate and
gently but firmly attach the two units together
Using four (4) 1" screws provided, place them in the four outside
holes and fasten tightly. Replace the top trim.

ADVANCED SETTINGS

The LG Mini-Split Wireless Wall Thermostat Kit is
designed to work seamlessly with the LG Mini-Split
Unit. In many installations multiple units will be
installed so to ensure proper installation and opera-
tion each Wireless Wall Thermostat in every room
must be merged within the proximity of the Mini-
Split Unit the same room. Follow these steps for
success every time!
STEP 1
On the bottom right of the thermostat touch and release the black
reset button.
• Touch target centre
• When you see the display indicate touch for advanced settings
– touch the screen immediately
• Now you are ready to setup
the thermostat.