General Installation Instructions - LG DOAS Installation And Operation Manual

Failure to observe the following instructions will result in premature failure of the DOAS and possibly void your warranty.
Receiving the Unit
• Check the unit for damage that may have occurred during transit.
• If damage is found, note it on the carrier's freight bill and request an inspection by the carrier's agent immediately.
• Check the name plate to ensure the correct model sizes and voltages were received and match and satisfy the job requirements.
• In order to protect the warranty, if repairs need to be made to damaged goods then the factory should be notified before any repair action is
taken. Certain equipment alterations, repairs and manipulation of equipment without consent from the manufacturer may void the product
warranty.
Upon receipt, check the shipment for items that ship loose such as filters and remote sensors. Review
order and shipment documentation to identify potentially loose shipped items. These items may have
been placed inside the unit cabinet for security. Installers and owners should secure all doors with locks
or nuts and bolts to prevent unauthorized access.
Storage
The DOAS cannot be stored outdoors. If installation does not occur immediately following delivery,
store the equipment in a dry protected area away from construction traffic and in the proper
orientation as marked by the packaging. Prior to storing the unit, secure all loose-shipped items.
Handling the Unit
Before lifting the unit, ensure all shipping material has been removed. If spreader bars, blocking or
other lifting devices are used, take extra care to ensure the cabinet, coil and fans are not damaged.
LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG Life's Good" is a registered trademark of LG Corp.

GENERAL INSTALLATION INSTRUCTIONS

Due to our policy of continuous product innovation, some specifications may change without notification.
Figure 5: Lockable Handle
11