Executing Firmware Update - Panasonic KX-UDS124 Administrator's Manual

7.4 Executing Firmware Update

•
In the Web user interface, click the [Maintenance] tab, click [Firmware Maintenance], and then select
[Automatic] for [PS Update Type].
Firmware Server URL
•
In a configuration file, specify the URL in "FIRM_FILE_PATH".
•
In the Web user interface, click the [Maintenance] tab, click [Firmware Maintenance], and then enter the
URL in [Firmware File URL].
Configuration Parameter Example
By setting the parameters as shown in the following example, the SIP-CS will automatically download the
firmware file from the specified URL, "http://firm.example.com/firm/01.050.fw", and perform the update
operation if the currently used firmware version is older than 01.050.
Example
FIRM_UPGRADE_ENABLE="Y"
FIRM_VERSION="01.050"
PS_FIRM_UPGRADE_AUTO="Y"
FIRM_FILE_PATH="http://firm.example.com/firm/01.050.fw"
7.4 Executing Firmware Update
After configuring the firmware update settings for the Super Master CS in the configuration file, the Super
Master CS distributes configuration information to all other SIP-CSs. The firmware of each SIP-CS is updated
when it receives the configuration information. The firmware update procedure of each SIP-CS is detailed
below.
Air Sync Group 1
Super
Master CS
Slave CS
Slave CS
Slave CS
268 Administrator Guide
Air Sync Group n
Air Sync
Master CS
Slave CS
Slave CS
Slave CS
Firmware
Server
Document Version 2013-03