3.5.9 PRI30 Card (KX-TDA0290CE/KX-TDA0290CJ)
Function
1-port ISDN Primary Rate Interface card (30B channels). EURO-ISDN/ETSI compliant.
LEDs
RJ45
To NT1 / Extension
To NT1/Extension
For BNC
Accessories and User-supplied Items
Accessories (included): Ferrite core ´ 1
User-supplied (not included): RJ45 or BNC connector
CAUTION
•
When connecting this optional service card to the trunk, connect through an NT1; do not connect to
the U interface of the trunk directly.
•
PRI ports are SELV ports and should only be connected to SELV services.
Notice
When connecting the RJ45 connector, attach the included ferrite core. Refer to "3.2.9 Attaching a Ferrite
Core".
Note
•
In some countries/areas, this optional service card must not be connected to the Public Switched
Telephone Network.
•
Use only 1 type of connector (RJ45 or BNC) for connection; RJ45 and BNC cannot be used
simultaneously.
•
This optional service card can be used for either trunk or extension connection, by setting the A/B
switch or using the connector with appropriate pin assignments.
•
To confirm the trunk connection, refer to "Confirming the Trunk Connection" in "3.16.1 Starting the
PBX".
For RJ45
120Ω
120Ω
OR
75Ω
75Ω
3.5.9 PRI30 Card (KX-TDA0290CE/KX-TDA0290CJ)
BNC (TX)
BNC (RX)
Installation Manual
109