EN GLI SH CORDLESS DRILL/DRIVER DC733, DC740, DC750, DW907 with different accessories or poorly Congratulations! maintained, the vibration emission may You have chosen a D WALT tool. Years of differ. This may significantly increase the experience, thorough product development and...
Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. DC733, DC740, DC750, DW907 2) ELECTRICAL SAFETY Power tool plugs must match the outlet. WALT declares that these products described Never modify the plug in any way. Do under “technical data”...
EN GLI SH Do not abuse the cord. Never use the 4) POWER TOOL USE AND CARE cord for carrying, pulling or unplugging Do not force the power tool. Use the the power tool. Keep cord away from correct power tool for your application. heat, oil, sharp edges or moving parts.
EN GL IS H connection from one terminal to another. – Health hazards caused by breathing dust Shorting the battery terminals together may developed when working in wood. cause burns or a fire. – Risk of personal injury due to flying particles. Under abusive conditions, liquid may be –...
EN GLI SH SAVE THESE INSTRUCTIONS charger from the power supply when there is no battery pack in the cavity. Chargers Unplug charger before attempting to clean. Your DE9116 charger accepts D WALT NiCd and • DO NOT attempt to charge the battery pack NiMH battery packs ranging from 7.2 V to 18 V.
EN GL IS H To refresh your battery pack, place the battery in the way (i.e., pierced with a nail, hit with a charger as usual. Leave the battery pack for at least hammer, stepped on). Electric shock 10 hours in the charger. or electrocution may result.
Battery Pack (fi g. 1) Discard the battery pack with due care for BATTERY TYPE the environment. The DC733 operates on 14.4 volt battery packs. The DC740 and DW907 operate on 12 volt battery Do not incinerate the battery pack packs.
1 mm ; the maximum length is 30 m. operators use this tool. When using a cable reel, always unwind the cable Belt Hook (DC733, DC740) (fi g. 1) completely. WARNING: To reduce the risk of ASSEMBLY AND ADJUSTMENTS serious personal injury, DO NOT...
EN GLI SH TO INSTALL THE BATTERY PACK INTO THE TOOL HANDLE • Do not change gears at full speed or during use. 1. Align the base of the tool with the notch inside the tool’s handle (fig. 2). Removing and Fitting the Chuck 2.
EN GL IS H WARNING: To reduce the risk of 2. Set the collar (d) to position 1 and begin serious personal injury, ALWAYS hold screwdriving (low torque). Make a few practice securely in anticipation of a sudden runs in scrap or unseen areas to determine the reaction.
EN GLI SH using a cloth or soft non-metallic brush. Do not use water or any cleaning solutions. Optional Accessories Rechargeable Battery Pack WARNING: Since accessories, other This long life battery pack must be recharged when than those offered by D WALT, have it fails to produce sufficient power on jobs which not been tested with this product, use...
Page 17
EN GL IS H GUARANTEE WALT is confident of the quality of its products and offers an outstanding guarantee for professional users of the product. This guarantee statement is in addition to and in no way prejudices your contractual rights as a professional user or your statutory rights as a private non-professional user.
Page 20
Black & Decker - D WALT Tel: +32 (0)015 - 15 47 9211 België en Luxemburg Nieuwlandlaan 7, IZ Aarschot B156 Fax: +32 (0)015 - 15 47 9210 B-3200 Aarschot www.dewalt.be Danmark WALT Tlf: 70201511 Sluseholmen 2-4 Fax: 70224910 2450 København SV www.dewalt.dk...