ENGLISH (Original instructions) SPECIFICATIONS Model HP330D Concrete 8 mm Steel 10 mm Capacities Wood 21 mm Wood screw 5.1 mm x 63 mm Machine screw High (2) 0 - 1,500 No load speed (min Low (1) 0 - 400 High (2)
Page 3
EC Declaration of Conformity Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and Makita declares that the following Machine(s): refrigerators. There is an increased risk of Designation of Machine: electric shock if your body is earthed or grounded.
Page 4
Power tool use and care Service 17. Do not force the power tool. Use the correct 28. Have your power tool serviced by a qualified power tool for your application. The correct repair person using only identical replacement power tool will do the job better and safer at the parts.
ENC009-1 FUNCTIONAL DESCRIPTION IMPORTANT SAFETY INSTRUCTIONS CAUTION: Always be sure that the tool is switched off and the • FOR BATTERY CARTRIDGE battery cartridge is removed before adjusting or Before using battery cartridge, read all checking function on the tool. instructions and cautionary markings on (1) Installing or removing battery cartridge battery charger, (2) battery, and (3) product...
the tool to become overloaded. Then pull the Reversing switch action switch trigger again to restart. Low battery voltage: • 1. Reversing The remaining battery capacity is too low and switch lever the tool will not operate. If you pull the switch trigger, the motor runs again but stops soon.
NOTE: Selecting the action mode The fastening torque can be adjusted only when • the arrow points toward the mark on the ring. 1. Action mode changing ring ASSEMBLY 2. Arrow CAUTION: Always be sure that the tool is switched off and the •...
Page 8
If the tool is operated continuously until the battery Hammer drilling operation • cartridge has discharged, allow the tool to rest for 15 minutes before proceeding with a fresh battery. CAUTION: Do not pull the switch trigger repeatedly when the There is a tremendous and sudden twisting force •...
If you need any assistance for more details regarding 012924 these accessories, ask your local Makita Service Center. Thread a waist belt or similar through holster holder. Drill bits • Tungsten-carbide tipped hammer bit •...