Volume Control; Power On / Standby Mode - GE 99003 User Manual

Button Functions
Function/ Button
Mode 1
Volume
Up:
Audio Press
& Hold
Volume
Phone Up:
Press
& Hold
Short Press: < 3 seconds
Long Press: > 3 seconds

Volume Control

Press or hold the Volume Up or Volume Down button to adjust.
You will hear a clicking sound when you adjust the volume to the
maximum or minimum sound level.

Power ON / Standby mode

Press and hold the power button for 3 seconds.
• The Blue LED will blink rapidly: 3 times in 2 seconds
• The standby mode allows the transmitter (phone, USB adapter,
etc.) to automatically connect with the 99003 headset if the
initial pairing has already been done. Please refer to the
following section on "Pairing Mode" if this is a fi rst time pairing
of the two devices.
Caution: You will hear a high-pitched tone when the headphones
are turned ON (press the power button for 3 seconds) and the
headphones enter standby mode. If you keep pressing the power
button for another 3 seconds then Bluetooth
is initiated. You may want to wait until after the tone stops before
wearing the headphones
Note: To conserve battery power, always remember to turn off
the GE 99003 headphones when not in use.
Button Button
2 3
Volume Play /
Down: Pause:
Press Short
& Hold Press
Volume Answer
Down: Phone:
Press Long
& Hold Press
Button Button
4 5
Next Previous
Track: Track:
Short Short
Press Press
®
discovery/pairing
Button
6
Power Pairing
On/Off Press & Hold
Press 6 Sec.
& Hold
Power Pairing
On/Off Press & Hold
Press 6 Sec.
& Hold
5