Configuration Menu Functions
Only displayed for composite video/S-Video input
Only displayed for component video/Computer image input
Lamp Hours
Source
Input Signal
Resolution
Scan Mode
Refresh Rate
Sync Info
Video Signal
Deep Color
Status
Serial Number
Reset All
Reset Memory
Reset Lens Position
Reset Lamp Hours
34
• The message text will be displayed in yellow when it is time to replace the lamp.
• Time from 0H to 10H will be displayed as 0H. From 10H onwards, the display will be in units of 1H.
The "Info" menu is only used to display the projector status.
Display the color depth of HDMI transmission.
This is information about errors that have occurred on the projector.
This value is sometimes referred to when inquiries are made.
This value is sometimes referred to when inquiries are made.
p.47
p.47
p.47
p.47