AXM-P7050
This product conforms to new cord colors.
Los colores de los cables de este producto se
conforman con un nuevo código de colores.
Printed in Japan
<CRD3808-B> ES
<KSNNF/03E00000>
7
1
8
9
2
3
10
Fig. 1
Fig. 3
11
6
12
5
4
Fig. 2
Fig. 4
Installation
Note:
•
Before finally installing the unit, connect the
wiring temporarily, making sure it is all connect-
ed up properly, and the unit and the system work
18
properly.
14
•
Use only the parts included with the unit to
ensure proper installation. The use of unautho-
rized parts can cause malfunctions.
•
Consult with your nearest dealer if installation
requires the drilling of holes or other modifica-
19
tions of the vehicle.
•
Install the unit where it does not get in the dri-
ver's way and cannot injure the passenger if there
13
is a sudden stop, like an emergency stop.
Installing the display unit
Installation using the blacket
20
(Fig. 1) (Fig. 2) (Fig. 3)
1. Display unit
2. Blacket (A)
3. Screw
Fig. 5
Fig. 7
4. Binding screw
5. Washer
6. Blacket (B)
7. Tapping screw
8. Double faced tape
9. Dashboard or console
10. Drill 2 to 2.5 mm diameter holes
17
Installation using Velcro tape
(Fig. 4) (Fig. 5)
•
Thoroughly wipe off the surface before affixing
the velcro tape.
11. Display unit
12. Velcro tape (Rough surface)
13. Velcro tape (Soft surface)
14. Dashboard or console
16
15
Fig. 6
<ENGLISH>
Installation using the double faced tape
(Fig. 6)
•
Thoroughly wipe off the surface before affixing
the double faced tape.
15. Display unit
16. Double faced tape
17. Dashboard or console
Installing the hide-away unit
Installation using Velcro tape
(Fig. 7)
•
Thoroughly wipe off the surface before affixing
the velcro tape.
18. Hide-away unit
19. Velcro tape
20. Car mat or chassis