Using a Portable
Station (PS) or
Computer
Using a Portable Station
(PS)
By connecting the unit to a PS, you can use the unit's
microphones and speaker for calls made or received
with the PS.
Compatible Portable Stations (as of January,
2010)
–
KX-TCA155
–
KX-TCA255
–
KX-TCA275
–
KX-TD7580
–
KX-TD7680
–
KX-TD7685
–
KX-TD7694
–
KX-TD7696
Note
•
Product availability may vary by country or area.
Line Selection (IP + PS)
1.
Press [MENU].
2.
Press
.
LINE
•
When the operation mode is set to "USB
Audio",
LINE
select a line type.
3.
Select "IP + PS".
•
When "Line Selection" is set to "IP +
PS", TEL calls cannot be made or received.
4.
Press
.
SAVE
5.
Press [MENU].
Document Version
2010/02
–
KX-TCA175
–
KX-TCA256
–
KX-TCA355
–
KX-TD7590
–
KX-TD7684
–
KX-TD7690
–
KX-TD7695
is not displayed and you cannot
Using a Portable Station (PS) or Computer
Using a PS
1.
Confirm that "PS" is shown in the upper-right corner
of the display.
•
You can change the selected line by pressing
the centre function button ([F2]).
The IP line is selected.
[F2]
•
If you cannot select "PS", change the "Line
Selection" setting to "IP + PS" (explained
on this page).
2.
Make or answer a call using the PS.
3.
Connect the included PS Cable to the [AUDIO IN/
OUT] jack of the unit (A), and to the headset jack
of the PS.
•
Make sure the plug of the PS Cable is inserted
fully into the unit and PS, otherwise sound may
not be heard, or echoing and feedback may
occur.
•
Place the PS as far away from the unit as
possible.
4.
Press [
] to begin using the unit's microphones
and speaker.
•
Press [
] again to turn off the microphones
and speaker.
5.
Use the PS to end the call.
6.
Turn off the unit's microphones and speaker by
pressing [
].
Note
•
For best performance, we recommend setting
the receiver volume of the PS as follows:
–
4-volume level models: level 3
–
6-volume level models: level 4
The PS line is selected.
[F2]
A
Operating Instructions
43