Table of Contents
Advertisement
What to remember when throwing memory
cards away or transferring them to others
Formatting memory cards or deleting data using
the functions of the unit or a computer will merely
change the file management information: it will
not completely erase the data on the cards. When
throwing these cards away or transferring them
to others, either physically destroy them or use a
data deletion program for computers (commercially
available) to completely erase the data. Users are
responsible for managing the data on their memory
cards.
Liquid crystal displays
• Images or letters can get burned onto the screen
of the LCD if they are displayed for a long time,
but you can fix this by leaving the unit off for
several hours.
• The LCD monitor was made by high-precision
engineering, but black points may appear on the
LCD monitor screen, or points may remain on all
the time (red, blue or green points). This is not a
sign of product failure. The LCD monitor pixels
are highly precisely controlled with more than
99.99 % of the pixels effective. This leaves less
than 0.01 % of pixels that may not light or may
remain on all the time. These points are not being
recorded as video on the SD Memory Card.
• Condensation may form if you use the unit where
temperatures fluctuate. Wipe dry with a soft, dry
cloth.
• The LCD may appear dim after immediately
turning on a cold recorder, but will brighten as the
unit warms up.
• Do not keep the unit in humid areas. Although
rare, this could cause the inside of the LCD
monitor to become cloudy when the power is
turned on.
Protecting the terminals
Install the covers when the connection terminals
are not being used.
19
Advertisement
Table of Contents
