11. ASSEMBLY HINTS
1) Tighten the two TORX+ size 4 screws to the
torque of 12Ncm in the order shown.
3) When assemling the device and if the MAIN FLEX
ASSY has not been disassembled, remove WINDOW
CAPASITIVE FLEX ADHESIVE and replace it always
with a new one. Be careful not to damage the
capasitive flex area!
18
2) Tighten the four TORX+ size 6 screws to the
torque of 17Ncm in the order shown.
4) When placing the SLIDE ASSY make sure these
hooks are correctly attached.
Confidential Copyright © 2009 NOKIA All rights reserved
Nokia 6710 Navigator RM-491
Service Manual Level 1&2
Version 1.0
ISSUE 1