Page 1
Operating Instructions supplied with your phone system. For U.S.A. users For assistance, visit our Web site: http://www.panasonic.com/help for customers in the U.S.A. or Puerto Rico. For Canada users For assistance, please visit our support page on: www.panasonic.ca...
Table of Contents Introduction Other Information Smartphone Connect overview ....3 If you experience any trouble .....19 Error messages ..........19 Getting Started Troubleshooting .........22 Starting, exiting, and registering ....5 Screen layout ..........5 Status notifications ........6 Phone Features Making calls ..........7 Using other features during a landline call ..............7 Answering landline calls .......8 Using other handsets ........8...
– Copying the ringtone from your smartphone to your handsets (Android version only) Requirements R A compatible Panasonic phone system (see below) R A wireless router (IEEE 802.11g or IEEE 802.11n recommended) R iPhone 4, iPhone 4S, iPhone 5, iPhone 5S, iPhone 5C, iPad, or iPad mini (iOS 5.0 or later) An Android device (Android 4.0 or later)
Page 4
R iPhone and iPad are trademarks of Apple Inc., registered in the U.S. and other countries. ® R The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Panasonic Corporation is under license. ® R Wi-Fi is a registered trademark of the Wi-Fi Alliance.
Getting Started When prompted to register your Starting, exiting, and smartphone to the base unit, tap [Start]. R The app searches for base units registering connected to the same wireless network as your smartphone. If no base units are found, you can tap Starting the app [Search] to search again.
Getting Started Used to make calls to contacts stored in Indicates that the app cannot connect your smartphone. to the base unit. Make sure the base unit is turned on and that the base [More] unit and your smartphone are within (iPhone/iPad) range of your wireless router.
Phone Features Tap the desired contact, and then select Making calls the desired phone number if necessary. Tap [Landline] or [Cell phone] to select You can use the app to make landline calls, the line you want to use to make the call. mobile calls, an intercom calls.
Phone Features When finished, tap [Disconnect] to end Flash the call. Tap [FLASH Call wait] during a call to use Note: your phone system’s flash feature, such as to R You cannot make intercom calls to other answer a call waiting or to switch between two smartphones.
Phone Features Select the desired handset, and then wait for the handset user to answer. R You can cancel and return to the call by tapping [Hold]. After the handset user answers, open the options menu and tap [Conference] to start the conference call.
Call Log Features iPhone/iPad Viewing the call log next to the person or phone number you want to add. Start the app and open the [Call log] Android screen. Tap the person or phone number you want to add. Tap the desired tab to view outgoing, incoming, or missed landline calls.
Phonebook Features Phonebook features iPhone/iPad You can use the app’s phonebook features similarly to the way you use the contacts app of your smartphone. Note: R When using iPad or iPad mini, Smartphone Connect does not support adding or editing a contact’s picture.
Answering System Features When finished, tap [Disconnect] to exit Turning the answering the answering system. system on Start the app and open the [More] screen. Erasing all messages Tap [Connect to answering system] ® Start the app and open the [More] screen. [Answer on].
Other Features R Up to 500 contacts (500 phone numbers total) can be stored in the base unit Copying data to your phonebook. Pictures for up to 500 contacts phone system can be stored in each handset. R If a phonebook entry is erased from the You can copy various data stored in your base unit phonebook, its picture is not smartphone to your phone system.
Other Features want to copy the contacts’ pictures to, and then tap [Send]. Copying images (Android™ version only) Setting phone number You can copy images from your smartphone conversion codes to your handsets, and then use the images as If you store phone numbers in your wallpaper patterns.
Other Features R This feature only supports ringtones that Note: are saved on your smartphone’s SD card or R If you erase a ringtone that was used as the in its user-accessible internal memory. handset’s ringtone, “Tone 1” (default) will Built-in ringtones cannot be copied.
Other Features – Notifications Center: On Volume settings (Android – Show 5 unread items version only) – Alert style: Banners If the output volume for the speaker, headphones, etc. is too low or too high, you can use this setting to raise or lower the app’s Changing general settings master volume.
Registration Features Under [Registration], tap [Select base]. Registering your Tap [Auto] or the desired base unit and then tap [Select]. smartphone to additional R When [Auto] is selected, the app base units automatically connects to a base unit based on the wireless network name If the app is not registered to a base unit, use (SSID) that the smartphone is currently the procedure described on page 5.
Registration Features Adding a wireless access point Deregistering your If you expand your wireless network by adding smartphone a wireless access point that uses a different SSID than your wireless router, use this Use this procedure to delete your procedure to add the wireless access point to smartphone’s registration from the desired the app’s settings.
Other Information If you experience any trouble If you experience any trouble with the app’s features, first confirm the following. R Are your base unit and wireless router turned on and functioning properly? → Refer to the operating instructions supplied with your wireless router for troubleshooting information if necessary.
Other Information Display message Cause and/or solution The base unit didn’t R There was a problem when deregistering your smartphone. respond. Please use → Use a handset to deregister your smartphone from the base another handset to cancel unit. the registration later. E2-04 The base unit is not R There is a communication problem.
Page 21
Other Information Display message Cause and/or solution Memory full R The base unit’s or handset’s memory is full. E5-05 → Delete unnecessary data and try again. Note that if a phonebook entry is erased from the base unit phonebook, its picture is not erased. You can erase it manually (page 15).
Other Information Troubleshooting Refer to the Operating Instructions supplied with your phone system for additional troubleshooting information. General use Problem Cause and/or solution Cannot make or receive R Your smartphone’s Wi-Fi feature is disabled. landline calls, cannot use → Make sure that your smartphone’s Wi-Fi feature is enabled most app features and that your smartphone is connected to the same wireless network as your base unit.
Page 23
Other Information Wireless router signal quality Problem Cause and/or solution Sounds cuts in and out R These and other problems may occur if there is a problem with when talking on landline the quality of your wireless router’s signals. calls →...
Page 24
Please refer to the base unit’s operating instructions for sales department and customer support information. Two Riverfront Plaza, Newark, NJ 07102-5490 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 PNQP1088ZA PP1113KT0...