Introduction
Control Panel
Buttons/Indicators
a
Brightness sensor
b
Operation indicator
c
d
e
f
g
h
i
j
k
Detects the brightness of the room. When Color Mode is set to "Auto", the
optimum image quality is set according to the brightness detected by the sen-
sor.
p.29
s
Flashes to indicate warm-up in progress or cool-down in progress. Shows the
projector's status through a combination of other indicators lit and flashing.
p.67
s
Turns the projector power on or off.
Lit when the projector is on.
Changes to the image from each input port.
Flashes orange when it is time to replace the lamp. Shows the projector's errors
through a combination of other indicators lit and flashing.
Flashes orange if the internal temperature is too high. Shows the projector's
errors through a combination of other indicators lit and flashing.
Select the adjustment value for the volume and for menu items.
Performs horizontal keystone correction when the Keystone screen is dis-
played.
p.27
s
Select the adjustment value for the keystone correction and for menu items.
p.27
s
Return to the previous menu level when a menu is displayed.
Select functions and settings when a menu is displayed.
Displays and closes the configuration menu.
On the configuration menu, you can make adjustments and settings for Signal,
Image, Input Signal, and so on.
10
Function
p.22
s
p.68
s
p.23
s
p.56
s
p.67
s
p.67
s
p.28
s
p.56
s
p.56
s