LG SuperSign Elite-c Owner's Manual page 5

Setting IP Address for Network Monitor
Once the network cable is connected, set an IP address of the signage monitor to com-
plete the network connection. Follow the steps below to set the IP address of the monitor:
1
Open the [Menu] window on the monitor.
2
Select [Network] on the menu.
3
Select [Network Setting] in [Network].
4
Select IP setting mode in [IP Mode].
Case 1) IP Auto Setting
a. Click [Setting] to assign an IP address
automatically.
b. When IP setting is complete, click [EXIT] to exit the IP setting.
Case 2) IP Manual Setting
a. Assign an IP address, subnet mask, gateway, and DNS server address.
b. Click [Setting] to apply the IP setting.
c. When IP setting is complete, click [EXIT] to exit the IP setting.
5
On the [Option] window, select [Product/Service Info] and then check whether the
IP address is properly assigned.
NOTE
y A Local Area Network (LAN) is a network of computers in a short-range area such as
home, office and school.
NETWORK
• Player Name
• Network Setting : Wired
• Network Status : Not connected
• Server IP Setting
• Server IP Status : Not connected
Example: [Option] window
5
Installation
Move OK
ꔋ