Panasonic Strada CN-NVD905U Installation Instructions Manual page 7


Establish the rear connection of
the unit.
After fi xing Power connector  , fi x the rear of
the unit to the car body by either method (a) or (b).

Insert the unit into Mounting
collar  .
Secure the clamp plate of Mounting collar 
to the hook.
Insert trim plate  .

Snapping point
Snapping point

After installation reconnect the
negative (–) battery terminal.
Mounting procedures (B)
Use the brackets supplied with your car when mounting this unit. The bracket shape and mounting method vary with
car manufacturers, car types and manufacturing year. Please consult your nearest dealer or installer.
Cooling fan
Do not block the area around it.
 Removing procedures
 Insert two fl athead screwdrivers between the unit and
the mounting collar, then detach the four hooks.
Hook
 Hold the unit and pull it forward until the hooks are
visible.
 Remove the screwdrivers and pull the unit out with
both hands.
(When not using Mounting collar  )
Note:
Use pliers to bend the fi ngers
on the bracket vertically.
Select mounting screws according to the hole
positions and hole shape of the bracket.
 Round head screw
(5 mm  6 mm)
Note:
Reuse the round head screws that
fi xed the transportation brackets for
two more positions.
 Flat-Head screw
(5 mm  6 mm)
Hook
( page 4)
7
7