Manageability Feature Enabling
i
DASH features within system BIOS is enabled per default.
Manageability features such as DASH are disabled by default on the PCI Express Gigabit Ethernet
Adapter with DASH functionality.
DASH Enabling
DASH can be enabled in one of two methods:
●
Broadcom Manageability Configuration and Control application (BMCC)
●
Broadcom Advanced Control Suite (BACS)
BACS and BMCC are not pre-installed in the system pre-installation.
Enable DASH with BMCC
►
Download the BMCC from www.ts.fujitsu.com.
►
Open a Command box as Administrator.
►
Go to the directory where the Broadcom application is stored.
►
Run bmcc enable.
Enable DASH with BACS
►
Download the BACS from www.ts.fujitsu.com.
►
Open a Command box as Administrator.
►
Go to the directory where BACS is stored.
►
Run setup.
►
During the installation select the features OOB Management, CIM Provider and Management
Agent.
These features are needed to enable the OOB Management Menu and provide the WMI interface for
management agents.
Fujitsu Technology Solutions
Manageability Feature Enabling
9