Husqvarna AB has a policy of continuous product
development and therefore reserves the right to modify the
design and appearance of products without prior notice.
Read through the Operator's manual carefully
and understand the content before using the
machine.
These instructions supplement the instructions that were
included with the machine. For other procedures, please
refer to the opertaing instructions for hte machine.
!
WARNING!
Under no circumstances may the design
of the machine be modified without the
permission of the manufacturer. Always
use genuine accessories. Non-authorised
modifications and/or accessories can
result in serious personal injury or the
death of the operator or others.
!
WARNING!
This accessory may only be used
together with the intended clearing saw/
trimmer, see under heading "Approved
accessories" in chapter Technical data in
the machine's Operator's Manual.
The machine is only designed for cutting branches and twigs.
CONTENTS
SYMBOL EXPLANATION
Symbols .............................................................................. 2
CONTENTS
List of contents .................................................................... 3
Carburetor ........................................................................... 9
Gearbox ............................................................................ 10
Lubrication ........................................................................ 10
Technical Data ................................................................... 11
List of contents
3
English -