Log-In And Log-Out - Panasonic System 850 Operating Instructions Manual

Log-in and Log-out

Before starting the following procedures, all system compo-
nents must be turned on.
The following procedures apply when the WV-CU850
System Controller is connected to the system. Some of
functions are not available when the WV-CU350 System
Controller is connected.
Log-in
1. Turn on the power switches of all system components.
2. Press the POWER ON/OFF Switch located on the rear
of the System Controller, to the ON position.
The LINK indicator lights up and the following displays
will appear on the LCD display of the system controller.
INFORMATION
HELLO!
3. Select your registered operator ID number (up to 5 dig-
its) by pressing the numeric keys, then press the
[CAMERA (ENTER)] key.
"PASSWORD" will appear on the LCD display of the
controller.
INFORMATION
ID:850
1
T&D
ALM S
4
( ALARM )
ALM H
7
SHIFT
4. Select your registered password (up to 5 digits) by
pressing the numeric keys, then press the [CAMERA
(ENTER)] key.
INFORMATION
ID:850
PASSWORD:
**
1
T&D
ALM S
4
( ALARM )
ALM H
7
SHIFT
78
INFORMATION
ID:
NO OPERATOR
INFORMATION
ID:850
PASSWORD:
–––––
2 3
LOGOUT AREA
CAM ID GEN
AUX1 OFF AUX1 ON
VLD S SYS S
CALL PGM
5 6
PRESET PRESET
MSTATUS ALL
VLD H AUX2 OFF AUX2 ON
8 9 C A M DIGITAL
P O S I OUT
DEF OFF DEF ON
0 CAMERA
CLEAR
(ENTER)
(ESC)
BLK EXIT AUTO PAN
INFORMATION
ID:850
PASSWORD:OK
*****
2 3
LOGOUT AREA
CAM ID GEN
AUX1 OFF AUX1 ON
VLD S SYS S
CALL PGM
5 6
PRESET PRESET
MSTATUS ALL
AUX2 OFF AUX2 ON
VLD H
8 9 C A M DIGITAL
P O S I OUT
DEF OFF DEF ON
0 CAMERA
CLEAR
(ENTER)
(ESC)
BLK EXIT AUTO PAN
If operator ID and password are correct, "OK" will
appear for 2 seconds on the LCD display.
Note: If an operator ID and password error have
occurred, "NG" will appear for 2 seconds on the
LCD display with a beep sound, then the Log-in
procedure automatically returns to the start.
Log-out
This function is used when an operator is leaving the con-
troller, or no longer requires access to the system.
1. Hold down the [LOGOUT] key and then press the
[CAMERA (ENTER)] key to log out.
"NO OPERATOR" is displayed on the LCD display of
the controller.
INFORMATION
ID:
NO OPERATOR
1 2 3
T&D CAM ID GEN
ALM S VLD S SYS S
4 5 6
( ALARM )
ALL
MSTATUS
VLD H
ALM H
7 8 9
0
CLEAR
(ESC)
SHIFT BLK EXIT
2. Turn off the Power switch located on the rear of the
controller.
LOGOUT AREA
AUX1 OFF AUX1 ON
CALL PGM
PRESET PRESET
AUX2 OFF AUX2 ON
C A M DIGITAL
P O S I OUT
DEF OFF DEF ON
CAMERA
(ENTER)
AUTO PAN