Connectivity
Proxy port number
— Enter the port number of the proxy
●
server.
WLAN internet access points
Select
Menu
Settings
>
Destinations
Access
>
on the screen.
To edit a wireless LAN (WLAN) access point, open one of the
access point groups and select an access point marked with
.
Follow the instructions from your WLAN service provider.
WLAN network name
●
Search for
networks. If you select an existing network,
WLAN network mode and WLAN security mode are
determined by the settings of its access point device.
Network status
— Define whether the network name is
●
displayed.
WLAN network mode
●
hoc network and to allow devices to send and receive data
directly; a WLAN access point device is not needed. In an
ad hoc network, all devices must use the same WLAN
network name.
WLAN security mode
●
WEP,
802.1x
(not for ad hoc networks), or WPA/WPA2. If
you select
Open
network, no encryption is used. The WEP,
802.1x, and WPA functions can be used only if the network
supports them.
Homepage
— Enter the web address of the starting page.
●
Use access point
— Select
●
want the device to ask for confirmation before the
72
and
Connectivity
>
point, and follow the instructions
— Select
Enter manually
— Select
Ad-hoc
to create an ad
— Select the encryption used:
After confirmation
connection using this access point is created or
Automatically
destination using this access point automatically.
To enter the settings for the selected security mode, select
WLAN security
Security settings for WEP
WEP key in use
●
(WEP) key number. You can create up to four WEP keys. The
same settings must be entered on the WLAN access point
device.
Authentication type
●
authentication type between your device and the WLAN
or
access point device.
WEP key settings
●
the key),
WEP key
Security settings for 802.1x and WPA/WPA2
WPA/WPA2
●
to use an extensible authentication protocol (EAP) plug-in,
or
Pre-shared key
Complete the appropriate settings:
EAP plug-in settings
●
to the instructions from your service provider.
Pre-shared key
●
password must be entered on the WLAN access point
device.
WPA2 only mode
●
allowed to establish a connection in this mode.
if you
if you want the device to connect to the
settings.
— Select the wired equivalent privacy
— Select
Open
— Enter
WEP encryption
WEP key format (ASCII
(the WEP key data in the selected format).
— Select the means of authentication:
to use a password.
— Enter the settings according
— Enter a password. The same
— Only WPA2 enabled devices are
© 2008 Nokia. All rights reserved.
or
Shared
for the
(length of
or Hexadecimal), and
EAP