Panasonic KX-TD500 User Manual page 171

To activate an AT command (contd.)
T7433
SHIFT
Press SHIFT until
"FEAT" is displayed.
1 Command 1
2
Command 2
3 Command 3
4 Command 4
5 Command 5
Enter AT command
number.
T7436 / T7235
Features
Press "Features."
C.Tone
On-hook.
• An AT command can only be programmed by Serial Interface / Remote Programming
software.
• For more information about AT Command, please refer to the modem instructions.
User Manual
FEAT
Press "FEAT." Rotate Jog Dial
until "Extrn MODEM"
is at the arrow.
C.Tone
On-hook.
OR
NEXT
Rotate Jog Dial or
press "NEXT" until the
following is displayed.
→ E x t r n M O D E M
Extrn MODEM CTL (→1-5)
Press "Extrn MODEM CTL."
1 - 5
F W D C a n c e l O n c e
M E N U S E L
Press "SEL."
1 Command 1
2
Command 2
3
Command 3
4
Command 4
5
Command 5
Enter AT Command
number.
Operation
171