CMO Operations & Logistics
Training & Vendor Development
Multimedia Creation & Support
7.
ASSEMBLY INSTRUCTION UPPER BLOCK
1. Remove the cover tape from the MAIN FLEX ASSEMBLY...
3. Peel up the cover tape from the DOMESHEET.
5. Now fix the MAIN FLEX ASSEMBLY to the UPPER FRAME
ALUMINIUM using finder pressure.
Service Manual 3250 RM-38
Page
4
(32)
CONFIDENTIAL
2. Shift the MAIN FLEX ASSEMBLY into the UPPER FRAME ALUMINIUM.
4. Align the DOMESHEET with the SIM Tool, mind the surrounding
components.
6. Carefully bend down both SWIVEL SENSOR flex foils.
Copyright © 2006-2007 NOKIA Corporation. All rights reserved.
Approved 3.0
MGR
05.July.2007