Security functions
Installing SystemLock
InstallingSystemLock
During initial installation, the first SmartCard becomes the Admin SmartCard. Together with the
PUK, it has all access rights, and should therefore be kept in a safe place. It must only be
used by an authorised user (Administrator), for instance to initialise user cards.
You need an Admin SmartCard if you want to set up a user group. You use this
Admin SmartCard to add further systems to the user group.
Setting up the first system in a user group or a stand-alone
system for use with SystemLock
User groups
► Start the device and call up BIOS Setup.
► From the Security menu, choose the option SmartCard SystemLock.
The following SmartCard SystemLock menu will be displayed:
Security
SmartCard SystemLock
SmartCard SystemLock
Install Single PC
Install Group PC
► Insert a new SmartCard in the reader and press Enter.
74
Not Installed
[Enter]
[Enter]
Enter PIN:
Item Specific Help
Installs the security
from a SystemLock Admin
SmartCard into this PC
without modifying any
data on the SmartCard.
A correct SmartCard is
[
]
required for a
permanent installation.
Fujitsu Technology Solutions