Table of Contents
Advertisement
Answering Calls
1. When the phone rings, pick up the handset and press the
TALK/SPEAKER button.
. When finished, press END button to hang up.
- OR -
If the auto talk mode is selected, pick up the handset from the
charge cradle to answer the call immediately.
NOTE: Adjust the handset volume by pressing the
caller ID-volume (5 or 6) button during a call.
Call Timer
After you press the TALK/SPEAKER button on the handset, the built-in
call timer shows on the display and counts the length of time of the
call in minutes and seconds.
Auto Standby
If you place the handset in the cradle while the handset is off the
hook (during a call), the call is automatically disconnected.
Ringer Volume (Shortcut)
There are two ways to set the ringer volume. One is the traditional
way as described in the Programming Functions; Sound Setup; Ringer
Volume menus. The other one is this short cut to ringer menu.
1. Make sure the phone is OFF (not in TALK mode).
. Press the #pause/ringer button to display SET RINGER LEVEL 5.
. Use the caller ID-volume (5 or 6) button to scroll to your
selection. LEVEL 5 is the default setting.
. Press #pause/ringer button again to save and display the new
selection for a few seconds.
Advertisement
Table of Contents
